It is important you are aware of the fact that turntables are one of the great ways that you can go about enjoying your vinyl music, owing to the fact that the recent turntables are capable of converting the analog vinyl music to digital format. USV turntables most especially are one of the best ways to achieve that, all that it requires is that you get the turntable connected to your PC and go on with the process of conversion from the analog to the Digital format, thereby following certain procedures. The Pickmyturntable official website is guaranteed to offer you different turntables. The options of turntables are meant to provide you with quality music at a very pocket-friendly price.

Turntables are made available in two different forms; the direct drive and the belt drive types. The aforementioned are named in the manner that they are driven. They are designed to play 7′ and 12″ vinyl discs

The direct drive type is designed in a manner that the motor is placed directly under the center of the platter that is directly connected to the platter. It is important you are aware of the fact that Matsushita introduced the very first direct-drive type commercial turntable to the public and it was the SP-10

Ever since the introduction of the SP-10 by Matsushita, there have been several advances that have been made with the progress in science and technology. This is the reason why the recent models are stealing the show from the older models in the market. Despite the advances made, the same technology has been used for the design.

The different types of the drive of the turntable must meet various requirements and are of particular importance. A fast run-up of the turntable, a low vibration transmission of the engine on the turntable and an exact control of the turntable speed is essential. The drive or motor of today’s record player distinguishes between two forms of the drive: the direct drive and belt drive.

What makes a record player with the direct drive?

In the case of a direct drive turntable, the transmission, as the name implies, takes place directly and without intermediate gear. The axis of the turntable is also at the same time the axis of the drive motor.

Here, a distinction is made between two different variants of the engine. In the first variant of the turntable, the motor is completely integrated into the chassis and the turntable is driven directly by a motor spindle.

In the second variant of the turntable, the turntable and the engine form a unit. Here only the stator and the generator coil are firmly connected to the chassis. These then move a ring magnet, which is located below the turntable. The change in the speed happens here via a speed change of the motor.

Direct-drive turntables are particularly popular in the DJ sector. Fast response to speed changes and a good run-up time make them especially suitable for mix and scratch DJs.

What is to be considered when buying this kind of turntable?

Take care when using the direct drive motor on cheap turntables, strong high torque motors can negatively affect running characteristics. So it can come in the transmission to a bucking. This can then affect the sound quality. Strong engines also affect the turntable, the PLL control should help to stabilize.

Today’s high-quality direct drive turntables outperform even the best belt-driven turntables available today. High-quality direct-drive turntables are powered by DC motors.

Why buy a turntable anyway?

Vinyl has been pushed back strongly lately, resulting in rising sales. The laying of the plate needle, a slight crackle, and an oversized booklet are often cited as pro-arguments. But unlike the MP3 player, there is a lot on a turntable that you can do wrong.

Remember to adjust the pickup

Most turntables today come with a pre-assembled tonearm, headshell, and pickup. If this is not the case with you, you need to adjust the pickup and bring it to its position. First, you attach it to the headshell, the head of the tonearm. You only need to tighten the screws slightly, as we will adjust the pickup later on the turntable.

Now you plug the cables into the pins of the tonearm to make an electronic connection between the two components. If this is a little difficult, you can easily help yourself with a pair of flat-nose pliers or tweezers. The red and green colour markings stand for the right audio channel. White and blue are assigned to the left side.